Bruce – DUNDEE STRIP – CB230 Seashell

Bruce – DUNDEE STRIP – CB230 Seashell

Category Floors
Flooring Type Hardwood
Product Number CB230
Collection Dundee Strip
Species White Oak
Performance Class Best
Warranty Residential Warranty: 50 Years
Construction Solid Hardwood
Length Varying Lengths: 8 1/4 – 84 in.
Width 2 1/4 in.
Thickness 3/4 in.
SKU: WOO-GF-DUDEEPLANK-1349 Categories: , Tag:
  • Description
  • Additional information


Design/Texture Traditional Finish
Finish Dura-Luster Plus Urethane
Gloss High Gloss
Edge Type Micro Edge / Square Ends
Sq. Foot Per Carton 20
Installation Location On/Above Ground Level
Installation Method Nail
DIY Level Experienced
Variation Icon Board-to-Board Color Variation
Wood is a natural material that features changes in color and tone. The board-to-board color variation is more pronounced in some species, less in others. If you like the look of contrasting light and dark tones, select a species that offers most color variation. If you prefer consistent color from board to board, choose the least color variation.
Hardness Scale Hardness Scale
The density/hardness of the wood species and its ability to withstand foot traffic, children and pets will impact its wear performance, and will vary from species to species. Strong, resilient Oak is used as the industry benchmark. The hardness scale shown to the left shows the relative hardness of this wood species.

Additional information





Combination Base & Shoe
A molding used when a base is desired. Used to cover expansion space between the floor and the wall. Pre-drill and nail into the wall, not the floor.
Quarter Round
A molding used to cover expansion space next to baseboards, case goods, and stairs steps. Pre-drill and nail to the vertical surface, not to the floor.
Reducer Strip
A teardrop shaped molding used around fireplaces, doorways, as a room divider, or as a transition between wood flooring and adjacent floor coverings that are less thick. Fasten down with adhesive, small nails or double-faced tape.
Stair Nose
A molding undercut for use as a stair landings trim, elevated floor perimeters, and stair steps. Fasten down firmly with adhesive and nails or screws. Pre-drill nail holes to prevent splitting.
A molding used as a transition piece from one flooring to another of equal height or to gain expansion spaces. Fasten at the heel in the center of the molding. Additional support may need to be added to the heel of the molding dependent upon the thickness of the goods covered.
A molding undercut used against sliding door tracks, fireplaces, carpet, ceramic tile, or existing thresholds to allow for expansion space and to provide a smooth transition in height difference. Fasten to subfloor with adhesive and/or nails through the heel. Pre-drill nail holes to prevent splitting.
Access these helpful tools on the Armstrong Flooring website to learn more about
your preferred flooring choice.